Set-up Video Guide for KinetCam
Click the link below to check the set-up videos of camera’s model.
- Set-up video for Mini Wi-Fi Cube Camera—Model :CAM1
2. Set-up video for mini direct recording camera—Model: CAM2
3. Set-up video for Wi-Fi 120-Day Standby Camera—Model:CAM3
4. Set-up video for Wireless Cat Collar Camera—Model:CAM4
5. Set-up video for Wi-Fi 60-Day Standby Camera—Model:CAM5
Chat with us now for live support from a real person.
(Online Time: Mon-Fri 9AM-5PM(PST))
A. Setup Camera by AP Config-CAM3
Steps in the above video:
1. Plug the power into the camera’s USB interface and the camera will automatically turn on.
2. wait for the camera LED to flash green.
3.Open the KINETCAM app and tap the ‘+’ icon in the top-right corner.
Select ‘Add device by scanning code’.
4.Choosing”Scan Code Setup”
4. Launch the Kinetcam application. The app will automatically detect the camera and prompt you to confirm whether you want to connect it to the internet. Hit ‘Confirm’.
5. Set a password for the camera, enter it twice to confirm it, and then hit ‘Confirm’.
6. Choose your home WiFi from the list of available WiFi networks, enter the WiFi password, and tap ‘Confirm’.
7. Wait for 30 seconds to allow the camera to reboot and change its status back to ‘Online’.
(If the status remains ‘Offline’ after 90 seconds, it’s possible that the WiFi password you entered is incorrect or that you selected the wrong WiFi network. Just do the setup again from beginning)
8. Click on ‘Play’ to view the camera’s live video feed for the first time. Click ‘Confirm’ to bind the device.
That’s it! Setup is now complete, and you can check out the camera’s live video or adjust its settings.
B. Setup Camera by Scan Code-CAM3
Steps in the above video:
1. Plug the power into the camera’s USB interface and the camera will automatically turn on.
2. wait for the camera LED to flash green.
3.Open the KINETCAM app and tap the ‘+’ icon in the top-right corner.
Select ‘Add device by scanning code’.
4. Click the ‘Next’ button twice.
Make sure the WiFi name is correct, then enter the WiFi password.
Click ‘Next’ and then ‘Confirm’.
5. Let the camera scan the code on the phone screen.
Hold the camera 4 to 6 inches away from the phone, with the camera facing the screen.
Watch for the GREEN LED on the camera – when it shows a steady green light, the scan is complete.
6. Click the ‘Next’ button in the app. The app will find and add the camera.
7. Name the camera and click ‘Next’ > ‘Confirm’ >‘Next’ > ‘Completed’.
8. You’re done!
Call Us for Quick Help:
+1 866 865 8676
(Service Time: Mon-Fri 9AM-5PM (PST))
Chat with us now for live support from a real person.
(Online Time: Mon-Fri 9AM-5PM(PST))